|
|
1 Croftbank Crescent
Uddingston
Glasgow G71 7JD
tel:01698 327997 - fax:01698 327776
tornado and tempest stainless steel unvented cylinders
tornado and tempest stainless steel unvented cylinders
add to favourites
NO SURCHARGE
on credit card purchases!
We recommend that you check all your heating controls to maximise the overall efficiency of your complete system.
Effective control does bring further savings.
Our heating controls section is here.
Effective control does bring further savings.
Our heating controls section is here.
remember
the building regulations now apply every time you change a boiler or hot water vessel!The Tornado Stainless and Tempest Stainless unvented hot water cylinder is a sealed pressurised hot water store providing high flow rates for domestic and commercial properties.
The range, covering capacities from 90 litres - 500 litres comprises of a horizontal or vertical "standalone" stainless steel storage cylinder which can be specified as direct or indirect, (coil type). A maximum flow rate of 55 litres/minute is achievable given an adequate supply.
Each type has factory applied rigid polyurethane foam, (CFC & HCFC free), thermal insulation for increased performance.
horizontal and vertical options
With no requirement for cold water storage cisterns, (which means fewer connections), the Tornado Stainless and Tempest Stainless cylinder can be located in any convenient space, (in the kitchen, in the bathroom, even in the garage), freeing roof space and lowering installation costs.
The unvented cylinder gives mains pressure hot water to all outlets and provides a very fast hot water recovery. This combination of high flow rate and fast recovery makes these stainless steel unvented cylinders ideal for any property with one or more bathroom.
advantages of unvented systems
- Easy to install
- Balanced hot and cold supply to all outlets at controlled pressure
- No tanks in roof space
- Drinking water at all cold water taps
- Cylinder siting virually anywhere in the property
- Stylish appearance
- All cylinders conform to building regulation G3
- Supplied complete with a full set of safety controls
the small print
An unvented cylinder must be installed by a qualified, competent person to the manufacturers instructions and to G3 of the Building Regulations.
Delivery anywhere on the UK mainland.
thermsaver - the company to rely on
with the products you simply fit and forget
with the products you simply fit and forget
tornado stainless
tempest stainless
