|
|
1 Croftbank Crescent
Uddingston
Glasgow G71 7JD
tel:01698 327997 - fax:01698 327776
the stainless steel tempest solar twin coil unvented hot water cylinder
the stainless steel tempest solar twin coil unvented hot water cylinder
add to favouritestechnical data
(A)
solar return
solar return
(B)
solar sensor
solar sensor
(C)
solar aquastat
solar aquastat
(D)
solar flow
solar flow
(E)
boiler flow
boiler flow
(F)
boiler aquastat
boiler aquastat
(G)
boiler return
boiler return
(H)
pressure and
temperature
relief valve
pressure and
temperature
relief valve
(I)
site fitted
expansion vessel
site fitted
expansion vessel
(J)
hot water
draw off
hot water
draw off
(K)
solar sensor pocket
solar sensor pocket
(L)
secondary return
200l and above
secondary return
200l and above
(M)
2.7kW
immersion heater
2.7kW
immersion heater
(N)
cold feed
cold feed
NO SURCHARGE
on credit card purchases!
remember
the building regulations now apply every time you change a boiler or hot water vessel!
We recommend that you check all your heating controls to maximise the overall efficiency of your complete system.
Effective control does bring further savings.
Our heating controls section is here.
Effective control does bring further savings.
Our heating controls section is here.
This diagram of the Tempest Stainless unvented twin coil cylinder, suitable for solar heating, is for illustration purposes only. Thermsaver make every effort to ensure that the information given on this page is accurate, however this information may change as a result of continuing product research and development.
The Tempest Stainless solar twin coil has a separate expansion vessel to reduce the height of the unit.
If you place your mouse over the selector number on the unvented cylinder diagram the relevant description will appear to the left, under the "TECHNICAL DATA" heading.
supplied components
- Inlet Control Group:
pressure reducing set
single check valve
filter
expansion relief valve
Energy Cutout Valve- Tundish
- Dual Probe Aquastat
- Immersion Heater (2.7kW)
site fitting- Expansion Vessel
18L on 170L and 200L models
24L on 250L and 300L models
The solar coil is 7m in length and 22mm in diameter.
The boiler coil is 9m - 12m in length, (dependant on the unvented cylinder capacity).
The pressure reducing valve, which reduces the pressure to 3.0 bar, is factory set as is the expansion valve which is pre-set to 5.0 bar.
Please use our Enquiry Form if you have any unanswered questions or for any further information you may require.
Delivery anywhere on the UK mainland.
thermsaver - the company to rely on with the products you simply fit and forget
