You're currently on:
Stainless Steel Horizontal Unvented Hot Water Cylinder
The Horizontal Stainless Steel Unvented Cylinder has a separate expansion vessel.
Description
- Pressure and temperature relief valve
- 22mm coil flow from boiler
- 22mm hot water draw off
- 22mm coil flow from boiler
- 22mm cold water feed
- 2.7kW immersion heater
- 22mm coil return to boiler
- Dual probe aquastat
- 22mm secondary return (200L, 250L 300L only)
Supplied Components
- Inlet Control Group:
- pressure reducing valve set:
- single check valve:
- filter:
- expansion relief valve
- Energy Cutout Valve
- Tundish
- Dual Probe Aquastat
- Expansion Vessel:
- 12L on 125L and 150L models:
- 18L on 170L and 200L models:
- 24L on 250L and 300L models
- Mounting Cradle (2)
The pressure reducing valve, which reduces the pressure to 3.0 bar, is factory set as is the expansion valve which is pre-set to 5.0 bar./
The direct models of the Telford Stainless horizontal unvented cylinders have 2 immersion heaters each rated at 2.7kW.
All horizontal unvented cylinders are made to order and delivery is approximately 7 - 20days
This diagram of the Telford Stainless horizontal unvented cylinder is for illustration purposes only. Thermsaver make every effort to ensure that the information given on this page is accurate, however this information may change as a result of continuing product research and development.
Please use our Enquiry Form if you have any unanswered questions or for any further information you may require.
thermsaver is the company to rely on
with products you simply fit and forget