Dantherm wireless remote control, HRC 2
This optional remote control allows the user access to further control options within your MVHR unit, including:
- Automatic demand control
- Manual operation
- Week programme operation
- Away operation
- Night operation
- Fireplace operation
- RF Controller including pic
Our range of flexible ducts are available in diameters from 22mm to 550mm. Within the range any diameter may be produced in order to meet our client’s specific requirements. The tubes are produced from aluminium or stainless steel. Factory insulated ducts are available with 25mm or 50mm of insulation.
Using perforated inner tubes, both Regaduct Acoustic and Regatenuators provide a high degree of sound absorption in the duct system. The ducts are available with 25, 50 or 75mm thicknesses of high density acoustic insulation and may be supplied in lengths up to 5 metres for cutting to length on site, or factory cut to length with spigot end terminations ready to install.
Rigid ducting and Pre-insulated, rigid ducting is also available
Electric after heaters help maintain a comfortable climate in low energy houses with no additional heat emitters on the first floor.
Electric Pre heaters are primarily for frost protection of the heat exchanger. They are of most benefit in areas where the temperatures might fall regularly below -6°C for a sustained period.
Wall Mounting Rail
Mounting rail’s are for planned installations of HCV 5 behind the door in a cupboard. With this rail the installation depth will be reduced.
- Insulation tape (50×3 mm),
- vibration damper
- u-profile (19×5 mm) are included.
- Dimension: 526 mm x 30 mm.
Siphon trap kit
Siphon trap kit including 2 m ¾” armed hose and glands.
Heat cable, 3 m
- 230V, 10W/m
- including 5°C thermostat for frost protection of drain
- 30 m extension
- with plug for connection of control panel to the HCH/HCV unit
Accessory control HAC 1
Accessory control with connection of:
- heating coils
- cooling coils
- geothermal collector
- duct damper
- stop function
- fire thermostat
- CO2 sensor
- hygrostat and alarms
- 5 m cable
Power supply 230VAC – 24VDC, for duct control
Power supply to be mounted in the accessory control if the ventilation unit is controlling the duct damper.
Hygrostat, Sauter HSC 120 F001
The hygrostat is connected to the accessory control in case that a higher air change rate is required in rooms with high humidity.
The CO2 sensor is connected to the accessory control if the air change has to be controlled in accordance with the CO2 level in a given room.
If you have any queries or questions regarding our Dantherm range and accessories, give us a call on 01698 300100.