Distributors of Heating, Hot Water and Ventilating Products - Established 1985

14 Melford Road
Righead Industrial Estate
Bellshill ML4 3LR
Search Site
Call 01698 300100
for your heating and ventilation systems

Free frost stat with all outdoor models

A full range of telescopic flue kits are available for the complete Thermsaver oil boiler range.

Newsletter

Newsletter
 

You're currently on:

Combi Oil Boilers

Combis - short for combination boilers, are now the most popular form of boilers in the UK and are supplied in either condensing SEDBUK A or standard efficiency SEDBUK C ratings. The combi boiler is a highly efficient water heater and central heating boiler combined in the one unit. The Thermsaver combi boiler has a small (50Ltr) hot water store providing hot water on demand without the need for a separate hot water cylinder or header tanks in the loft - saving on space. Water is delivered to the taps at mains pressure at approximately 18ltr per minute giving you high power showers without the need for a separate pump. The boiler will also provide hot water for either radiators or underfloor heating. Condensing oil boilers now operate more efficiently and are installed in exactly the same way at the standard models.

This diagram of the Thermsaver standard efficiency combi oil boiler is for illustration purposes only. We have made every effort to ensure that the information given on this page is accurate. However this information may change as a result of continuing product research and development.

Exploratory view of a standard efficiency thermsaver combi oil boiler

Description

  1. Built In Programmer
  2. Expansion Vessel
  3. Insulation Blanket
  4. High Limit Stat
  5. Flexible Oil Line
  6. Central Heating Flow
  7. Safety Relief O/F
  8. Domestic Hot Water
  9. Cold Water Mains
  10. Return Tapping (Either Side)
  11. Automatic Air Vent
  12. Safety Relief Valve
  13. Pressure Gauge
  14. Circulating Pump
  15. Thermostatic Mixing Valve (Dhw)
  16. Diverter Valve
  17. Filling Loop Valve And Check Valve
  18. Low Pressure Safety Switch
  19. Plate Heat Exchanger
  20. System Drain Cock
  21. Snorkel Tube For The Balance Flue
  22. Thermal Store
  23. Pre-Wired Burner
  24. Boiler Control Stat

Conventional boiler system vs. combi boiler system

diagram of a conventional boiler system

diagram of a conventional boiler system

diagram of a thermsaver oil combi boiler system

diagram of a Thermsaver oil combi boiler system

The Combi boiler has the reliability and efficiency of the thermsaver range of oil boilers combined with the economy of direct mains domestic hot water.

It does not require either a bulky, noisy and unsightly storage tank or hot water cylinder. The combi oil boiler has been designed to be compact and space saving to fit under standard work surfaces, easy to install and maintain. It has the benefit of being very quiet and odour free.

Designed complete with fitted time clock to allow efficient control of central heating. The integral hot water storage vessel within the boiler has a rapid recovery time.

There is no storage tank or hot water cylinder needed with the Combi system which means considerably less pipework and instant hot water.

thermsaver - the first name in oil fired boilers

Please use our Enquiry Form if you have any unanswered questions or for any further information you may require.

thermsaver is the company to rely on
with products you simply fit and forget