You have no items to compare.
Product Description
The Heatmiser PRT is a programmable room stat and programmer in one, providing up to 4 different temperatures at different times of the day.
The PRT includes Optimum Start which is an energy saving feature designed to reduce the amount of heat up time required by automatically learning the heat up time your home needs.
Standard Features;
*Large display
*5/2 day or 7 Day Programming (Selectable in software)
*Self Learning Optimum Start on 1st and 3rd Level
*4 Comfort Levels per Day
*Temperature Hold Facility
*Holiday Facility
*Automatic blue back-light (Turns off after 30 seconds)
*Flush mounting
*°C / °F Selectable
*Up to 4 changes in room temperature
*Key Locking Facility
*Frost protection with adjustable temperature setting.
*Remote control optional
*Supply: 230v /
*Outputs: Volt free 3A Max
*Dimensions: 98mm x 85mm x 13mm (Height, Width, Depth)
(Please note this thermostat is flush mounting and so requires a back box)
Upgrading your Existing Thermostat and selecting the Terminal Output
1. Firstly, check that you have at least three wires (excluding the earth) behind your existing stat. If you have, the PRT is compatible.
2. Our changeover terminal option is for those controlling a valve that needs power to open and power to close. If you are simply controlling a boiler, just select the standard model.
The PRT includes Optimum Start which is an energy saving feature designed to reduce the amount of heat up time required by automatically learning the heat up time your home needs.
Standard Features;
*Large display
*5/2 day or 7 Day Programming (Selectable in software)
*Self Learning Optimum Start on 1st and 3rd Level
*4 Comfort Levels per Day
*Temperature Hold Facility
*Holiday Facility
*Automatic blue back-light (Turns off after 30 seconds)
*Flush mounting
*°C / °F Selectable
*Up to 4 changes in room temperature
*Key Locking Facility
*Frost protection with adjustable temperature setting.
*Remote control optional
*Supply: 230v /
*Outputs: Volt free 3A Max
*Dimensions: 98mm x 85mm x 13mm (Height, Width, Depth)
(Please note this thermostat is flush mounting and so requires a back box)
Upgrading your Existing Thermostat and selecting the Terminal Output
1. Firstly, check that you have at least three wires (excluding the earth) behind your existing stat. If you have, the PRT is compatible.
2. Our changeover terminal option is for those controlling a valve that needs power to open and power to close. If you are simply controlling a boiler, just select the standard model.
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.