You're currently on:
Heat Recovery Ventilation Design Example
For A Two Floor Dwelling
This example shows an actual layout plan of our heat recovery ventilation system in a two floor dwelling.
The components used for this installation are listed below:
| Component And Price List | Description | Quantity |
|---|---|
| Loft mounted air unit includes sonic/thermal insulation pack, control unit and condensate drain kit | 1 |
| Summer bypass unit with 230V elecric actuator | 1 |
| Air grille with control kit - 100mm | 8 |
| Air valve - 125mm | 2 |
| Air valve - 160mm | 1 |
| Fire damper (fusible link) - 100mm | 1 |
| Fixed louvre outlet - 160mm | 2 |
| Aluminium duct (4m length) - 100mm | 6 |
| Aluminium duct (4m length) - 125mm | 7 |
| Aluminium duct (4m length) - 160mm | 8 |
| Tee - 125mm x 100mm | 3 |
| Tee - 160mm x 100mm | 3 |
| Tee - 160mm x 125mm | 2 |
| Tee - 160mm x 160mm | 1 |
| Male coupling - 100mm | 3 |
| Male coupling - 125mm | 5 |
| Male coupling - 160mm | 3 |
| Reducer - 125mm x 100mm | 2 |
| Reducer - 160mm x 125mm | 2 |
| Flexible silencer (1m) - 160mm | 2 |
| PVC sealing tape (33m) - 50mm | 5 |
| Wire fixing clips - 160mm | 4 |
We hope that this example illustrates the benefits of allowing thermsaver to design your heat recovery ventilation system using a set of plans to accurately compile a quotation.
For all pre sales and Technical advice call Thermsaver on 01698 300100
thermsaver is the company to rely on
with products you simply fit and forget