You're currently on:
Heat Recovery Ventilation Design Example
For A Single Floor Dwelling
This example shows an actual layout plan of our heat recovery ventilation system in a single level dwelling.
The components used for this installation are listed below:
| Component List | Description | Quantity |
|---|---|
| Dantherm Loft mounted air unit includes sonic/thermal insulation pack, control unit and condensate drain kit | 1 |
| Air grille with control kit - 100mm | 7 |
| Fire damper (fusible link) - 100mm | 1 |
| Fixed louvre outlet - 125mm | 2 |
| Aluminium duct (4m length) - 100mm | 7 |
| Aluminium duct (4m length) - 125mm | 4 |
| Tee - 125mm x 100mm | 5 |
| Male coupling - 100mm | 2 |
| Male coupling - 125mm | 1 |
| Reducer - 125mm x 100mm | 2 |
| Flexible silencer (1m) - 125mm | 2 |
| PVC sealing tape (33m) - 50mm | 3 |
| Wire fixing clips - 125mm | 4 |
We hope that this example illustrates the benefits of allowing thermsaver to design your heat recovery ventilation system using a set of plans to accurately compile a quotation.
Please use our Enquiry Form if you have any unanswered questions or for any further information you may require.
thermsaver is the company to rely on
with products you simply fit and forget